sales@gninstruments.com

                                                      Location -> Service

                                                      Type:500 series Portable Hardness Test Analyzer System

                                                      Illustrate:● For the special material, users can customized special material curve, solve the measuring material’s narrow limitation of ordinary Leeb hardness tester.

                                                      CX-PHT-500 Portable Hardness Test Analyzer System
                                                      Function:
                                                      ● For the special material, users can customized special material curve, solve the measuring material’s narrow limitation of ordinary Leeb hardness tester.
                                                      ●Match impact device, load and release for once, unique patent design, make the test reading more convenient. Easy operation, improve working efficiency at a high rate of speed, to avoid operation error.
                                                      ● Can use at stand-alone working mode or analysis system mode.
                                                      ● Including roller hardness of expert test curve.
                                                      ● Automatic identification types of impact device.(DS,D,DC,D+15,C,G,DL,E)
                                                      ● Have indication value software calibrate function.
                                                      ● In stand-alone mode, more than 1000 groups data stored, and have time annotation. In analysis system mode, it is mass storage.
                                                      ● All English display, friendly users interface.
                                                      ● Can pre-set hardness upper and lower limit, automatically display when exceed the range, convenient for users to test in batch.
                                                      ●Voltage display and undervoltage tips, when under voltage, it will automatically power-off.
                                                      ● Li-ion chargeable battery, no memory effect, finish charge mode when connect to PC.
                                                      ● Backlight liquid crystal display, convenient for dark environment.
                                                      Parameter:
                                                        PHT-500
                                                      Hardness system HL,HB,HRB,HRC,HRA,HV,HS
                                                      Upper and lower limited set range 170-960HLD
                                                      Measuring direction 360°(vertically downward, inclined downward, 
                                                      horizontal, inclined upward, vertically upward)
                                                      Charge time 8 hours(overcharge protection)
                                                      Charging source 5V,1.2A,6W
                                                      Environment temperature 0-40℃
                                                      Overall dimension(length*width*height) 128x37x23.3(mm)
                                                      weight 166g
                                                       
                                                       
                                                       
                                                       
                                                      PC Software Operation Interface 
                                                       
                                                      Software interface:
                                                       
                                                      Connection: choose interface, build communication connection.
                                                      Store: store the current group measuring data in data base.
                                                      Callout: callout storage measuring data or delete data from data base. 
                                                      Print: output current displayed data report. 
                                                      Overrun: set alarm tolerance limit. 
                                                      Eliminate: eliminate all the data in data-caching mechanism.  
                                                      Uploading: upload data in instrument to management software. 
                                                      Set: measuring condition of online measurement.。
                                                      Measure: enter into online measurement condition, read and displays current measuring data.
                                                       
                                                      Application condition:
                                                       
                                                      ● Leeb hardness tester uses dynamic measurement to get the hardness value,
                                                       it has different request of weight and thickness compare with static method of desktop machine.
                                                      ●Tested workpiece’s weight should equal or more than 2kg, and the thickness should equal or more than 10mm. 
                                                      ●The roughness of tested part should content Ra≤6.3μm
                                                      ●the weight ≤2kg or thickness≤10mm of the tested workpiece should be regular and close-grained, coupling on working platform. 
                                                      ●surface-hardening treatment workpiece, the hardened layer thickness should equal or more than0.2mm.
                                                       
                                                       
                                                      Application:
                                                      ●installed machine or permanent assembling parts.
                                                      ● mould cavity
                                                      ●quick test for many parts of large-sized workpiece 
                                                      ● workpiece that the test space is narrow
                                                      ●failure analysis of pressure vessel, steam turbine generator unit and its device
                                                      ●bearing and other accessories. 
                                                      ●material distinguish in mental material warehouse. 
                                                      ●request the test results should have the regular original record. 
                                                      ●heavy workpiece
                                                       
                                                      Measured material:   
                                                      Steel and cast steel, alloyed tool steel, stainless steel, gray cast iron, nodular cast iron,
                                                       cast aluminium alloy, pinchbeck alloy(brass), copper-tin alloy(bronze), fine copper, forged steel, roller.
                                                      For special material can customized conversion table for users.

                                                       
                                                      Abnormal shape impact device
                                                       
                                                      Summarize:
                                                      Leeb hardness tester has good probe interchangeability. Various abnormal shaped
                                                       impact device can change freely and don’t need to calibrate. Satisfy different users, 
                                                      different occasion, different workpiece of accurate hardness measurement.
                                                       
                                                      Abnormal shaped support ring:
                                                      Model Remark Model Remark
                                                      Z10 Measure outer cylindrical surface R10~R15 K10-15 Measure outer spherical surface SR10 
                                                      Z14.5 Measure outer cylindrical surface R14.5~R30 K14.5-30 Measure outer spherical surface SR14.5 
                                                      Z25 Measure outer cylindrical surface R25-R50 HK11-13 Measure inner spherical surface SR11 
                                                      HZ11 Measure inner cylindrical surface R11~R13 HK12.5-17 Measure inner spherical surface SR12.5 
                                                      HZ12.5 Measure inner cylindrical surface R12.5~R17 HK16.5-30 Measure inner spherical surface SR16.5 
                                                      HZ16.5 Measure inner cylindrical surface R16.5~R30 UN Measure outer spherical surface, 
                                                      radius adjustable R10
                                                       
                                                      Measuring range:  
                                                      Material Hardness system Impact device
                                                      D/DC C G DL
                                                      Steel and cast steel HRC 17.1~68.5 20.0~69.5   20.6~68.2
                                                      HRB 59.6~99.6   47.7~99.9 37.0~99.9
                                                      HB 140~651 80~683 90~646 150~646
                                                      HV 83~976 80~996   85~950
                                                      HS 26.4~99.5 31.9~102.3   26.5~99.4
                                                      Steel HB 142~651      
                                                      CWT,ST HRC 17.1~67.1 20.0~69.5    
                                                      HV 83~976 80~996    
                                                      Stainless steel HRB 59.6~99.6      
                                                      HB 140~651      
                                                      HV 83~976      
                                                      GC. IRON   140~334   92~326  
                                                      NC,IRON HB 140~387   140~364  
                                                      C.ALUM HB 30~159      
                                                      BRASS HB 40~173      
                                                      HRB 13.5~95.3      
                                                      BRONZE HB 60~290      
                                                      COPPER HB 45~315      
                                                       
                                                      Remark: the tested workpiece should satisfied certain test condition:1.the weight should not less than 2kg; 
                                                      2.min. thickness should not less than 10mm; 3. Surface roughness should not less than 1.6um. 
                                                      If it can not satisfied the above condition, it needs stable support or close-grained coupling.
                                                       
                                                      Abnormal shaped impact device technical parameter: 
                                                       
                                                      Abnormal shaped impact device DC(D)/DL D+15 C G E
                                                      (need
                                                       import)
                                                      Impact energy
                                                      Impact body mass
                                                       
                                                      11mJ
                                                      5.5g/7.2g
                                                      11mJ
                                                      7.8g
                                                      2.7mJ
                                                      3.0g
                                                      90mJ
                                                      20.0g
                                                      11mJ
                                                      5.5g
                                                      Ball head hardness:
                                                      Ball head diameter
                                                      Ball headmaterial
                                                      1600HV
                                                      3mm
                                                      Tungsten 
                                                      carbide 
                                                      1600HV
                                                      3mm
                                                      Tungsten 
                                                      carbide
                                                      1600HV
                                                      3mm
                                                      Tungsten
                                                       carbide
                                                      1600HV
                                                      5mm
                                                      Tungsten
                                                      carbide
                                                      5000HV
                                                      3mm
                                                      diamond
                                                      Impact device diameter
                                                      Impact device length
                                                      Impact device weight
                                                      :
                                                      20mm
                                                      86(147)/ 
                                                      75mm
                                                      50g
                                                      20mm
                                                      162mm
                                                      80g
                                                      20mm
                                                      141mm
                                                      75g
                                                      30mm
                                                      254mm
                                                      250g
                                                      20mm
                                                      155mm
                                                      80g
                                                      Test-piece max. hardness  940HV 940HV 1000HV 650HB 1200HV
                                                      Test-piece surface average roughness 
                                                      Ra:
                                                      1.6μm 1.6μm 0.4μm 6.3μm 1.6μm
                                                      Test-piece min. weigh
                                                      Measure directly
                                                      Need stable support
                                                      Need close-grained coupling 
                                                       
                                                      >5kg
                                                      2~5kg
                                                      0.05~2kg
                                                       
                                                      >5kg
                                                      2~5kg
                                                      0.05~2kg
                                                       
                                                      >1.5kg
                                                      0.5~1.5kg
                                                      0.02~0.5kg
                                                       
                                                      >15kg
                                                      5~15kg
                                                      0.5~5kg
                                                       
                                                      >5kg
                                                      2~5kg
                                                      0.05~2kg
                                                      Test-piece min. thickness
                                                      close-grained coupling
                                                      hardened layer min. depth  
                                                       
                                                      5mm
                                                      ≥0.8mm
                                                       
                                                      5mm
                                                      ≥0.8mm
                                                       
                                                      1mm
                                                      ≥0.2mm
                                                       
                                                      10mm
                                                      ≥1.2mm
                                                       
                                                      5mm
                                                      ≥0.8mm
                                                      Ball head  impression size 
                                                      Hardness:300HV
                                                       
                                                      impression dia.
                                                      impression depth
                                                      0.54mm
                                                       
                                                      24μm
                                                      0.54mm
                                                       
                                                      24μm
                                                      0.38mm
                                                       
                                                      12μm
                                                      1.03mm
                                                       
                                                      53μm
                                                      0.54mm
                                                       
                                                      24μm
                                                      Hardness: 
                                                      600HV
                                                       
                                                      impression dia.
                                                      impression depth 
                                                      0.54mm
                                                       
                                                      17μm
                                                      0.54mm
                                                       
                                                      17μm
                                                      0.32mm
                                                       
                                                      8μm
                                                      0.90mm
                                                       
                                                      41μm
                                                      0.54mm
                                                       
                                                      17μm
                                                      Hardness:
                                                      800HV
                                                      impression dia.
                                                      impression depth 
                                                      0.35mm
                                                       
                                                      10μm
                                                      0.35mm
                                                       
                                                      10μm
                                                      0.35mm
                                                       
                                                      7μm
                                                      --
                                                       
                                                      --
                                                      0.35mm
                                                       
                                                      10μm
                                                      Impact device
                                                      application range:
                                                      DC type 
                                                      measuring hole
                                                       or in cylinder; 
                                                      DL type 
                                                      measuring long 
                                                      and thin narrow 
                                                      groove or hole;
                                                      D type
                                                      For regular 
                                                      measurement
                                                      D+15 type
                                                       contac
                                                      t surface
                                                       wee, 
                                                      measuring 
                                                      groove or 
                                                      incurvate
                                                       surface 
                                                      C type
                                                       impact
                                                       force
                                                       is small,  
                                                       has
                                                       small 
                                                      surface
                                                       damage
                                                       to tested
                                                      surface. 
                                                      Don’t destroy 
                                                      hardened 
                                                      layer,
                                                      measuring 
                                                      small, 
                                                      light, 
                                                      and thin parts and 
                                                      surface
                                                       hardened layer
                                                      G type 
                                                      measuring 
                                                      big, thick,
                                                       heavy  and 
                                                      surface is
                                                       roughness 
                                                      casing piece
                                                      E type 
                                                      measuring 
                                                      the material 
                                                      that the
                                                       hardness
                                                       is high 

                                                      Last:600,610 series Pen type Durome.. Next:130,140 series Leeb Hardness Te..

                                                      Contact Us

                                                      Office Address: Room 402, No. 650, Xinzhuan Rd., Jiuting Town, Songjiang District, Shanghai, China (Mainland)

                                                      Phone:021-57635022

                                                      E-mail:info@gnflowmeter.com

                                                      E-mail:sales@gninstruments.com

                                                      關閉
                                                      亚洲VA成无码人在线观看天堂