sales@gninstruments.com

                                                      Location -> Service

                                                      Type:600,610 series Pen type Durometer

                                                      Illustrate:The newest pen type durometer is small volume, light weight, convenient to carry, and measurement is simple. 12864 graph dot matrix, oversized and superbright display. All angle measurement. D/DL two kinds of impact system that can interconvertible.

                                                      CX-PHT-600,610 Pen type Durometer
                                                      Summarize:
                                                         The newest pen type durometer is small volume, light weight, convenient to carry, and measurement is simple.
                                                         12864 graph dot matrix, oversized and superbright display. All angle measurement. D/DL two kinds of impact system that can interconvertible.
                                                          
                                                      Measured material:
                                                      Steel and cast steel, alloyed tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminium alloy, pinchbeck alloy(brass), copper-tin alloy(bronze), fine copper, forged steel, roller(only for PHT-600).CX-PHT-600,610 Pen type Durometer
                                                      Summarize:
                                                         The newest pen type durometer is small volume, light weight, convenient to carry, and measurement is simple.
                                                         12864 graph dot matrix, oversized and superbright display. All angle measurement. D/DL two kinds of impact system that can interconvertible.
                                                          
                                                      Measured material:
                                                      Steel and cast steel, alloyed tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminium alloy, pinchbeck alloy(brass), copper-tin alloy(bronze), fine copper, forged steel, roller(only for PHT-600).
                                                      Parameter:
                                                      Model PHT-600 PHT-610
                                                      Indication error ±0.3%(HL=800/±2HL)
                                                      Hardness value HL/HRC/HRB/HB/HV/HS/σb(rm)
                                                      Indentification impact device type D type(standard built-in)D-DL two-in-one(optional)
                                                      Measuring angle All-angle
                                                      Communication  USB interface, Bluetooth 
                                                      wireless connect to computer
                                                      /
                                                      Storage capacity  400pcs storage group, 
                                                      36000pcs data
                                                      4 storage group,
                                                       4000pcs data 
                                                      Statistics Average value, max. value, min. value, root-mean-square value
                                                      Power supply 3.7V Li battery chargeable battery
                                                      Volume 148×44×22(mm)
                                                      Net weight 110g
                                                      Standard Accord with GB/T 17394-1998,ASTM A956 standard
                                                       
                                                      Measuring range:
                                                      Impact device D HLD:170-960 can customized other hardness value that is not section out
                                                      Test material/
                                                      hardness system
                                                      HRC HRB HB HV HS HRA σb(N/mm²)
                                                      Steel and cast steel 20.0-67.9 59.6-99.5 80-647 80-940 32.5-99.5 30-88 375-1710
                                                      Alloy tool steel 20.5-67.1     80-898     1170-2639
                                                      Stainless steel 19.6-62.4 46.5-101.7 85-655 85-802     740-1725
                                                      Gray pig iron 21-59 24-100 93-334 90-698      
                                                      Nodular cast iron 21-60 24-100 131-387 96-724      
                                                      Cast aluminium   24-85 30-159 75-227      
                                                      Pinchbeck alloy(brass)   13.5-95.3 40-173        
                                                      Copper-tin alloy(bronze)   14-100 60-290        
                                                      Fine copper   14-100 45-315        
                                                      Forged steel      142-651        
                                                      roller              
                                                      Impact device DL HLDL:560-950
                                                      Test material/hardness system HRC HRB HB HV HS
                                                      Steel and cast steel 20.6-68.2 37.0-99.9 81-646 80-950 30.6-96.8
                                                      Alloy tool steel 20.6-73.1     73-1184  
                                                      Nodular cast iron 18.6-72.3   88-669 97-1167  
                                                       

                                                      Last:620 series Pen type Durometer Next:500 series Portable Hardness Te..

                                                      Contact Us

                                                      Office Address: Room 402, No. 650, Xinzhuan Rd., Jiuting Town, Songjiang District, Shanghai, China (Mainland)

                                                      Phone:021-57635022

                                                      E-mail:info@gnflowmeter.com

                                                      E-mail:sales@gninstruments.com

                                                      關閉
                                                      亚洲VA成无码人在线观看天堂