Location -> Products -> Flow -> Flow Switch

                                                      Type: CX-FS-FR12 electronic flow switch( thermal differential type )

                                                      Illustrate:CX-FS-FR12 type Electronic flow switch is suitable for different kinds fluid,4.Widely used in pneumatic and hydraulic systems, flow monitoring for recycled water, cutting fluid and lubricating oil , the protection of pump’s run idle.

                                                       CX-FS-FR12 Electronic flow switch( Thermal differential type )

                                                      Brief Introduction
                                                      1.Suitable for the gas and liquid measurement
                                                      2.The set range can be 1-20m/s and have relay output (230VAC.4A).
                                                      3.Concise and direct indicator ,and with high reliable
                                                      4.Widely used in pneumatic and hydraulic systems, flow monitoring for recycled water, cutting fluid and lubricating oil , the protection of pump’s run idle
                                                      Main Features
                                                      1.No movable parts
                                                      2.Maintenance free and Easy installation
                                                      3.Suitable for variable diameter demand
                                                      4.Switching  value can be adjusted continuously
                                                      5.Extremely low pressure loss
                                                      6.Compact structure
                                                      7.LED indicator display flow trend and switch state
                                                      Technical Parameters
                                                      Set range 1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air)
                                                      Output PNP, NPN, Relay ,4-20mA, NO+NC (SPDT)
                                                      Power supply 24V±20%DC
                                                      Switching Current Max.400mA(PNP or NPN type ), Max.4A( Relay type )
                                                      Unload current Max.80mA
                                                      Flow indicator LED (6)
                                                      Set type potentiometer set
                                                      Proof Pressure range 100bar
                                                      Temperature gradient 4℃/s
                                                      Response time 1--13s,standard is 2s
                                                      Initialization time 8s
                                                      Electrical protection reversed-phase ,short circuit ,overload protection
                                                      Protection class IP67
                                                      Medium temperature 20--80℃
                                                      Environment temperature -20--80℃
                                                      Storage temperature -20--100℃
                                                      Connection M12 connector /2m cable (option)
                                                      Material Probe is stainless steel . Housing is PBT
                                                      Model Connection  Power Output
                                                      CX-FS-FR12-G12H-DC-RQ G1/2 DC24V relay

                                                      G1/4 or G1/2 screw connection 
                                                      When mounted vertically , it should install on the tube which flow direction is from the bottom to the top . When mounted horizontally , the probe should avoid air and sediment .
                                                      Electric connection 
                                                      LED functions and setup ( switch type )
                                                      Red LED light: If the cutting flow or velocity is less than the set value. The switch will be release and the analog value will be 4mA .
                                                      Yellow LED light: If velocity equal to the set value ,switch action .
                                                      Yellow and green LED light :It means that velocity is larger than set value. If the velocity will be faster ,the green LED  will be lighter ,
                                                      Installed the flow switch well ,let the velocity suit for monitoring and adjust the potentiometer .Let the first the green LEC just turn light . Then, after the velocity less than the current value , the switch will be released . To make the switch point less than the current velocity , it can adjust the potentiometer and make the green LED lighter .

                                                      Last:CX-PFS-HFS water flow switch Next: CX-FS-FR11 electronic flow sen..

                                                      Contact Us

                                                      Office Address: Room 402, No. 650, Xinzhuan Rd., Jiuting Town, Songjiang District, Shanghai, China (Mainland)